Hydro Jetting vs. Snaking: Which Drain Cleaning Method Is Right for You?

Hydro Jetting vs. Snaking: Which Drain Cleaning Method Is Right for You?

A snake and a hydro jetter both clear drains, but they do different jobs. A snake breaks through a clog. A jetter washes the inside of the pipe. Which one you need depends on what is in the line and how big the line is.

How snaking works

A drain snake, also called an auger, is a flexible cable with a cutting head that is fed into the line. It spins to break up a clog or hook onto it and pull it out.

Good for:

  • A simple clog in a sink, tub or toilet line
  • A single blockage, such as a hairball or a lodged object
  • Quick relief in an emergency

Limits:

  • It can punch a hole through grease or buildup without removing it
  • It does not clean the pipe wall
  • Roots can grow back quickly after being cut

How hydro jetting works

A hydro jetter pushes high-pressure water through a hose and out of a nozzle that sprays in several directions. The water scours the pipe wall and flushes the debris out of the line.

Good for:

  • Grease, soap and sludge buildup
  • Roots, which are cut and washed out
  • Repeat clogs on a main sewer line
  • Cleaning a line before a camera inspection or a liner

Limits:

  • It is not right for badly damaged or collapsed pipe
  • It does not repair cracks or joints
  • Some old pipe is too fragile for high pressure, so we check it with a camera first

Mini jetter and hydro jetter

Not all jetters are the same size. A mini jetter is made for small lines like a kitchen sink or a bathroom sink. A hydro jetter is the heavy-duty machine for main sewer lines and serious buildup. Using the right one for the line matters, because a small machine does not do much in a big pipe, and a big machine is more than a sink line needs.

Side by side

SnakingHydro jetting
What it doesBreaks through or pulls out a clogScrubs the pipe wall and flushes the line
Best forA single clog in a branch lineGrease, roots and repeat clogs
Cleans the pipe wallNoYes
Lasting resultOften temporaryLonger lasting
Pipe conditionGentler on fragile pipePipe should be sound

Which should you choose?

  1. One slow sink or tub: a snake or a mini jetter is usually enough.
  2. The same line keeps clogging: jetting, because the cause is probably buildup on the wall. See main sewer line keeps clogging.
  3. Several drains slow at once: the main line likely needs a hydro jetter. See slow drains throughout the house.
  4. You are not sure what is in the pipe: start with a camera inspection.
  5. Old cast iron with heavy scale: jetting alone may not be enough. See what is pipe descaling.

What affects the job

How long a job takes depends on the length of the line and how much buildup there is. We explain what to expect before we start.

Common questions

Is hydro jetting safe for old pipes? Often, but not always. That is why we look at the line with a camera when we are not sure.

Will jetting fix a crack or a belly? No. It cleans the line. Cracks and bellies need repair. See belly in a sewer line.

How long does jetting last? If buildup was the problem, a long time. If roots or a damaged pipe are the cause, the problem returns until the cause is fixed.

Call Acme Sewer & Drain Cleaning at (801) 930-8000.

(801) 930-8000